Workpiece Convenient Handling SXBJ-8 Sheet Metal Edge Milling Machine

A. The Workpiece and Function of Workpiece Convenient Handling SXBJ-8 Sheet Metal Plate Edge Milling Machine:

1. Workpieces Applicable for the SXBJ-8 Sheet Metal Plate End Chamfering Machine:

1) Specifications: Metal plates in the length range up to 8000mm, and width up to 2500mm, and thickness from 6mm to 100mm;

2) Material and Applied Sites: Most majority of the machine workpieces are carbon steel plates, which are applied in industries of Boiler/ Electric Power Plant/ Shipbuilding, etc.;

2. Function of the SXBJ-8 Sheet Metal Plate Edge Beveling Machine:

1) XBJ and SXBJ series Sheet Metal Plate Beveling Machine is a kind of important 1^st operation equipment, serving as welding preparation unit: Edges of workpiece steel plates will be machined into straight end face, or upper or lower slant edges;

2) The sketch of straight/ upper/ lower slant bevels produced from SXBJ-8: (Fig.1)

3) The straight edge end face produced from Wuxi JACK SXBJ-8 Sheet Metal Plate Edge Milling Machine: (Fig.2)

4) Wuxi JACK SXBJ-8 is milling on lower slant edge groove on carbon steel plate: (Fig.3)

5) Equipped with special facer blade, the SXBJ-8 can also mill out U shape round face groove: (Fig.4)

B. Advantage of Workpiece Convenient Handling SXBJ-8 Sheet Metal Plate Edge Beveling Machine:

1. Potential Risk during Operation of XBJ series Sheet Metal Plate Edge Milling Machine:

1) Function: As introduced previously, XBJ and SXBJ series Sheet Metal Plate Edge Milling Machine is a kind of large size equipment, processing large size heavy weight steel plates;

2) Working Way: The traditional way of loading the steel plates into the machine before edge milling, and taking off after edge milling, is by means of manual pushing and pulling;

3) Hidden Risk for Operation: This is conceivable fairly dangerous and uneasy, not only considering size and weight of steel plate, but also the sharp edges of steel plate that may do harm to operators;

2. Wuxi JACK Exclusively Configuration: As its name suggests, this workpiece convenient handling machine has its workpiece steel plate loaded into and out of the machine automatically, by means of hydraulic drive handling system. It is the unique function celled owned by Wuxi JACK for our Edge Beveling Machine;

3. The Wuxi JACK patent hydraulic drive automatic running steel plate loading brackets equipped with Edge Milling Machine: (Fig.5)

4. Working Principle of the Hydraulic Automatic Steel Plate Loading System in the Edge Milling Machine:

1) Structure: As can be observed from the above photo, this machine automatic system is composed of several pieces of brackets, with array of rolling rollers installed on its top surface;

2) Operating Way: During preparation period of the machine, driven with hydraulic oil cylinders, these rolling rollers will revolve, driving the steel plate forward;

3) Plates Handling: Upon the steel plate is sent to proper position of the machine work table, the hydraulic handling system stops running, and the steel plate is positioned by means of inserting plugs on the brackets;

5. Nature: This machine equipped with such hydraulic automatic handling system can be viewed as an advanced configuration Edge Milling Machine;

6. Please check the attached video of this product section, to view on running of the hydraulic loading system for the machine.

C. Other Technical Features of Workpiece Convenient Handling SXBJ-8 Sheet Metal Plate Edge Milling Machine:

1. From the attached first photo and below, you can identify on site installation and layout of the entire set of the SXBJ-8 at customer workshop: (Fig.6)

2. Back Side, or Operating Side of the SXBJ-8 Edge Beveling Machine:

Let us review it one by one:

1) Hydraulic driving workpiece steel plate loading system: The yellow color frame in the above photo;

2) The 2 sets of milling heads and its moving carriages: The orange color frames in the above photo:

a) Judging from its installation orientation, you can find that the left one set of milling unit is for milling on plate lower edge beveling, while the right one is for milling on straight edge and upper edge grooves;

b) The installation orientation of milling head for performing bottom edge beveling in double heads Edge Milling Machine: (Fig.7)

3) The milling unit carriage horizontal movement guiding precise linear guiderails and transmission rack: The light green color frame in the above photo;

4) The hydraulic oil tubes pipeline: The light purple color frame in the above photo.

D. Technical Parameters of Workpiece Convenient Handling SXBJ-8 Sheet Metal Plate Edge Milling Machine: