7-Axis 2500/9 Flame And Plasma Heavy Duty CNC Pipe Cutting Machine

A. The Use of 7 Axis 2500/9 Large Oxy-fuel Plasma CNC Pipe Intersection Cutting Machine:

1.       The attached first photo was taken at American customer site, on a set of Wuxi JACK 7 Axis 2500/9 Large CNC Pipe Cutting Machine. As can be seen from the photo, the on site operation of such Large CNC Pipe Intersecting Cutting Equipment need the assistance of climbing ladder for getting access to top of the large tank, and hoists for loading workpiece:

Working site of Wuxi JACK 5 Axis 2500/9 CNC Pipe Cutting Machine: (Fig.1)

2. Same as 7 Axis 2000mm series CNC Pipe Cutting Machine, here the 7 Axis 2500mm series (/12, /9, and /16) Large CNC Pipe Intersection Cutting Machine is the supplement to the product line of 7 Axis Heavy Duty Plasma Oxy-fuel CNC Pipe Cutting Machine, making it into complete specifications of Φ3000mm/ Φ1400mm/ Φ2500mm/ Φ2000mm, under the background of developing CNC Pipe Intersection Cutting Machine technique, and echoing market demand in recent years;

3. This group of CNC Pipe Intersection Cutting Machine aim at the demand segmentation of Φ2500mm diameter range pipe cutting and beveling.

B. The 7 Axis Control in 7 Axis 2500/9 Large Oxy-fuel Plasma CNC Pipe Cutting Machine:

1.       For meaning and purpose of the 7 Axis controlled with CNC, please check below sketches, and product section of “7 Axis CNC-CP 2000/12 Large Oxy-fuel Plasma CNC Pipe Intersection Cutting Machine“. 

2.       The Illustration on X/Y/Z/A/B Axis in 5/6/7 Axis CNC Pipe Intersection Cutting Machine: (Fig.2)

3.       The Illustration on V/W Axis in 6/7 Axis Large Oxy-fuel Plasma CNC Pipe Intersecting Cutting Equipment: (Fig.3)

C. Advanced Control Hardware in Wuxi JACK Oxy-fuel Plasma CNC Pipe Intersection Cutting Machine:

1.       Control software of operating system and interface are not the solitary factors make powerful function of Wuxi JACK CNC Pipe Intersecting Cutting Equipment. The corresponding hardware also plays key role;

2.       Below is detailed information on hardware of industrial computer (CNC), equipped in the product family of CP series Oxy-fuel Plasma CNC Pipe Cutting Machine:

1)       ADVANTECH integrating work station, 15´LCD touch screen, equipped with anti-virus self-protecting system;

2)       CPU：≥Intel Celeron 2.4Ghz or same grade CPU, RAM ≥256M，Hard Disk≥60G，floppy drive and standard CD/DVD drive, panel USB2.0 interface, fitting for high speed calculation and abundant working parts library, embedded in CNC Pipe Intersection Cutting Machine；

3)       Pendant PROFACE touch screen ≥3.8'，equipped with 15m joint cable of the pendant;

4)       U.S.A. 8 Axis PMAC interlock control card, double port RAM，PCI slot; communication interface, feedback interface, analogue value interface and I/O interface;

5)       As to work station style for the CNC, which is the control center of the CNC Pipe Intersection Cutting Machine:

a)       It is flexible of either worktable type, (see below figure 1);

b)      Or overhanging pendant type (see below figure 2), depending on actual working environment of on site workshop for the CNC Pipe Cutting Machine:

Standing Work Station style CNC Control board in CNC Pipe Cutting Machine: (Fig.4)

Overhang Pendant style CNC Control board in Large CNC Pipe Intersection Cutting Machine: (Fig.5)

D. Technical Parameters of 7 Axis 2500/9 Large Oxy-fuel Plasma CNC Pipe Cutting Machine:

Below is specification of 7 Axis 2500/9 Flame and Plasma Heavy Duty CNC Pipe Intersecting Cutting Equipment: