Large Stroke Double Heads SXBJ-16 Plate Edge Milling Machine

A. Property and Function of SXBJ-16 Large Stroke Double Heads Large Plate Edge Milling Machine:

1. Property: SXBJ-16 is an often selected large model in the product family of XBJ and SXBJ series Edge Milling Machine, second only to SXBJ-18 model;

2. Function of the SXBJ-16 Large Plate Edge Beveling Machine:

1) The SXBJ-16 large model machine has max. 16,000mm edge milling stroke for milling out welding grooves;

2) Equipped with 2 sets of milling heads in one machine, the welding grooves can be on both top and bottom edges of steel plates, as well as straight edge;

3) The 6 types of classical welding grooves made with SXBJ-16 model machine: (Fig.1)

3. The Workpieces of SXBJ-16 Large Plate End Milling Machine:

1) This can be either a single piece of 16000mm or less length steel plate pressed into the large machine worktable, or more than one piece of steel plates pressed together, in the total sum length equals to or less than 16,000mm;

2) Pressing a piece of steel plate onto worktable of the SXBJ-16 large machine: (Fig.2)

3) The max. thickness of steel plate to be beveled in this SXBJ-16 model machine for edge milling is 80mm, width 2500mm;

4) Correspondingly, the max. weight of steel plate to be edge milled in the SXBJ-16 double heads long stroke Edge Milling Machine is 25 Ton.

B. Advanced Configuration of SXBJ-16 Large Plate Edge Milling Machine:

SXBJ-16 of this product section is also an advanced configuration Edge Milling Machine. 2 examples are listed as below:

1. Steel Plate Pushing In and Pulling Out System for the Large Plate Edge Beveling Machine:

1) Why You Need this Function Unit: From the previous segment, you know that weight of steel plate for SXBJ-16 large model machine is from several tons to 25 ton;

2) Suppose by conventional way of manual job, the pushing into and pulling out the worktable of the large machine is dangerous for operator, and consumes long time;

3) For this reason, Wuxi JACK develops the solitary owned hydraulic drive automatic steel plate handling system for Edge Milling Machine, which relieves operator from this dangerous job, and makes the entire material handling operation high efficiency;

4) The hydraulic drive automatic running steel plate loading and unloading system equipped in the SXBJ-16 model machine: (Fig.3)

2. Wider Range of Beveling Angle in the SXBJ-16 Large Plate End Milling Machine:

1) Different from the conventional angular scope of 0°~45° adopted in machine, the 2 sets of milling head equipped in this SXBJ-16 model large machine is 0°~80°, which can be found from the attached 6^th photo and below;

2) The 0°~80° angle range milling head selected for the SXBJ-16: (Fig.4)

3) Advantage: The 0°~80° angle range milling head is very useful for workpieces steel plate of the large model machine, which usually have big thickness (80mm), and entails large angle. Please check the attached video on 80° edge milling operation performed in the machine.

C. Safety Measures Taken in the SXBJ-16 Large Plate Edge Milling Machine:

For this heavy duty Large Plate Edge Beveling Machine, safety is the utmost factor considered during development and daily running of the machine. Examples of several measures are:

1. Security Fender on Milling Head: (Fig.5)

1) Shown in the above photo, there is security fender installed on the milling head, covering its facer blade into an enclosed area;

2) In this way, hidden risk of operator fingers getting entangled into milling units and hurt with facer blade can be avoided, during edge milling operation in the machine;

3) Operator Eye Protection: Besides, there will be large volumes of scraps generated when the machine is in operation. And sometimes operator need to be very close to the milling heads to check the chamfering quality. From this we can see that there exists risk of particles flying out and doing harm to machine operator eyes. With this security cover, operator eyes can be effectively protected;

2. Emergency Stop Buttons in Edge Milling Machine:

1) For contingency control during working period of the machine, there is Emergency STOP button within easy reach of operator, on the handy operating pendant fit on the milling heads;

2) When emergency happens, this Emergency STOP button can be pressed down the very first time to prevent the problem from expansion to other segment of the large machine for plate edge beveling .

D. Technical Parameters of SXBJ-16 Double Heads Long Stroke Large Plate Edge Milling Machine: