RH-series Strip And Plate Edge Rounding Machine for Industry

1.       Category of RH series Edge Rounding Machine:

The attached first picture shows the two main sub categories of RH series Edge Deburring and Rounding machine:

1)     Strip Edge Rounding Machine:

a)       This is for end trimming on narrow strip plate, which is shown in the upper section of the first picture;

b)      Standard model is RH1000 Strip Edge Rounding machine, for end rounding working parts with max. width of 1000mm;

c)       Narrower width is available, for example, RH800 Edge Rounding Deburring machine;

2)     Plate Edge Rounding Machine:

a)       This is for processing wider width of workpieces, which is shown in the lower section of the first picture;

b)      Standard models include RH1500, RH2000, and RH3000 Plate Edge Rounding machine, which is for end trimming working parts with max. width of 1500mm, 2000mm, and 3000mm respectively.

2.       The Usage of RH series Edge Rounding Machine:

1)      As introduced its product group, RH series automatic Edge Rounding and Deburring machine is for making rounding and deburring on the four edges of workpieces, such as strip board, metal plate, H Beam web, vertical plate of T Beam, into round edge of Radius 2~2.5mm. Please check attached and below photo: (Fig.1)

2)      The workpieces going thru the Edge Rounding machine, its property of painting adhesion can be greatly enhanced; The stress concentration can be raised also, available for next step of working;

3)      The adoption of RH series Edge Deburring Rounding machine is a requisite step in producing this kinds of machineries: Which work in the damp environment with large volumes of moistures, such as Shipbuilding, Port, Offshore, etc.

3.       The Application of RH series Plate Edge Rounding Deburring Machine:

Correspondingly, to be specific, from the perspective of application, RH series Edge Rounding machine can be classified into four major categories of:

1)      RH1000 Strip Edge Rounding Deburring machine for T Beam Production, the second step following plate cut. This is the reason it can also be grouped as an equipment deployed in T Beam Production Line;

2)      RH1500~ RH3000 Plate Edge Deburring and Rounding machine for Shipbuilding;

3)      RH1500~ RH3000 Edge Rounding machine for Port Machinery;

4)      RH1500~ RH3000 Edge Deburring and Rounding machine or Bridge Industry.

4.       We Arrange Introduction on RH Series Edge Rounding Machine in the Form of:

1)      This product section starts on series of detailed introduction on RH series Edge Rounding Deburring machine from the aspect of machine structure, performance, usage, operation, and service, etc. in the next production sections;

2)      As can be observed from the attached pictures, the RH1000 Strip Edge Rounding machine has different appearance (or general structure) from that of the larger ones of RH1500, RH2000, and RH3000 Plate Edge Rounding machine. The reason behind that we will have deep exploration in the subsequent product sections;

3)      To have better understanding on these products, we arrange these models in staggered models, from the biggest one of RH3000 High Efficiency Edge Deburring and Rounding machine;

4)      Detailed parameters of each standard model of RH series Edge Rounding machine are listed in its corresponding product section;

5)      Besides the standard models, we can also design and produce special made Edge Rounding Deburring machine based on customer demand.