1. Purpose: There are 14 videos in this page, recording on work conditions of Wuxi JACK CNC Pipe Cut Machine from different perspectives. It is for demonstrating on high level performance of this Wuxi JACK superior product;
2. Function and Usage: There are several options on CNC control choices of 3/ 5 /6/ 7 axis for running of the CNC-CP series Flame Plasma CNC Pipe Cutting Machine. Customers can have their pipes/ tubes/ tanks/ cylinders... with diameters in the range of Φ80mm to Φ3000mm, and thickness from 3mm to 100mm to be cut off and got beveled with desired cutting pipe length/ hole diameter and edge kerf;
Detailed information on Wuxi JACK CNC-CP series Flame Plasma CNC Pipe Cut Machine, is illustrated in product pages of:
1) CNC Pipe Cutting Machine;
2) CNC Pipe Intersection Cutting Machine;
3) Advanced Wuxi JACK CNC Pipe Cutting Machine;
The 14 videos in this page cover different aspect on Wuxi JACK CNC-CP series CNC Pipe Cutting Machine work:
1. Panorama view on put into use CNC-CP-7-3000/12 model 7 Axis Large CNC Pipe Cutting Machine at customer facility;
2. Hand held piercing hole operation before automatic thick wall cutting in large Flame CNC Pipe Cut Machine;
3. Manage on operation of CNC-CP-7-3000/12 model 7 Axis Large Flame CNC Pipe Cutting Machine;
4. Different Steps of Commissioning on CNC Pipe Intersection Cutting Machine;
5. Flame and plasma cutting operation in CNC-CP series Flame Plasma CNC Pipe Cut Machine;
6. Finished workpiece pipe cut from 5/ 6/ 7 axis Large Flame CNC Pipe Cutting Machine
1) Background: This video was taken at customer facility: A petrochemical plant situated at Texas USA. A set of Wuxi JACK produced CNC-CP-7-3000/12 model 7 Axis Large CNC Pipe Cutting Machine was ready to work;
2) Workpiece: You can find a piece of Φ3000mm large tank being laid on friction roller group, and will be cut and beveled in the CNC Pipe Intersection Cutting Machine.
1) Pipe Thickness: As can be observed from the video, the large pipe to be cut in CNC Pipe Intersection Cutting Machine has 100mm thickness wall;
2) Pierce Necessary: The 100mm thickness wall pipe needs to have hole pierced and cut lead in line, before official automatic flame cutting in the CNC Pipe Cut Machine;
3) Pierce Operation: The thick wall hole piercing should be made by hand. As shown in the video, to have safe operation, operator of the CNC Pipe Cutting Machine should put on proper PPE (Personal protective equipment): Helmet and glove, hard shoes.
1) This short video was taken during commissioning on CNC Pipe Intersection Cutting Machine at Wuxi JACK workshop;
2) You can find tongue of flames being ejected from its Oxygen fuel cutting torch. This is for validating on the normal condition of cutting torch before official cutting in the CNC Pipe Cut Machine.