2. For customers who want to spend short time and have a quick understanding on this superior product of Wuxi JACK, this page may be a little guide. It is originated from Slides of “Wuxi JACK SAW I H Beam Welding Machine”;
1) Function and Position: I H Beam Submerged Arc Welding Machine is the 2nd set of central equipment in I H Beam Production Line. It fulfils finished submerged arc welding on the assembled H Beam in 45° orientation;
2) Delivering Solid Large Toe Welding Seam: The most conspicuous strong point of such SAW I H Beam Welding Machine is, it can perform SAW welding on T/ I / H Beams two or more passes, back and forth along whole length of workpieces;
This Slides illustrates that, Wuxi JACK designs and produces full range of SAW I H Beam Welding Machine for customer selection:
1. LHC model Trolley Moving SAW I H Beam Welding Machine, specifically for automatic I H Beam Production Line use;
1) Application: For manual and semi-automatic I H Beam Production Line use;
2) Single model of the LHT I H Beam Welding Machine can be used for fabricating all specifications of T/ I/ H Beam;
Application: For manual and semi-automatic I H Beam Production Line use, including 2 branches of:
a) Operating Mode: Two operators stand at lateral side of the SAW I H Beam Welding Machine mechanical main frame;
b) Characteristics: Saving land area; But more labor necessary;
c) Models: It has 2 optional models of LHA4C and LHA5C;
a) Operating Mode: One operator stands at central point of the SAW I H Beam Welding Machine mechanical main frame;
b) Characteristics: Saving labor; But occupies larger workshop space;
c) Models: It has 3 optional models of LHA4Z, LHA5Z and LHA55Z;
4. Flexible Choice: Customers can select the most appropriate model of SAW I H Beam Gantry Welding Machine in any mechanical structure and sizes, based on your practical condition and demand.
1. Indicated in the photos of this slides, by means of welding power supply control consoles (2 pieces, black color), and assistant welding function units introduced in the previous slides, operating on Wuxi JACK I H Beam Submerged Arc Welding Machine is high efficiency, convenient and easy to grasp;
Just need to do following steps to initiate on operation of the I H Beam Welding Machine, as shown in the slides:
1) Load workpiece T/ I/ H Beam onto its 45° workpiece rack by means of traveling crane;
2) Make adjustment on welding process control parameters (Welding current/ Voltage/ Speed) by means of control consoles and operating panel;
3) Start on the SAW I H Beam Welding Machine;
4) Next, operator only need to watch on running process of the SAW I H Beam Gantry Welding Machine, without any labor job.