Handy XBJ-3 Single Milling Head Plate Edge Milling Machine

A. Specialty of XBJ-3 Metal Plate Edge Milling Machine:

1. The XBJ-3 single head configuration machine for sheet metal edge milling introduced in this product section is a compact and handy model, in its product group of XBJ series Edge Milling Machine;

2. Feature: This is the smallest model equipment  of sheet metal end milling: Equipped with one piece of milling head, it has the valid Max. working stroke of 3000mm for processing on welding groove on metal plates;

3. When to Select This Model of XBJ-3 Plate Beveling Machine?

1) For customers whose metal plates need to be edge milled all fall within the range of 3000mm length;

2) And most majority of welding grooves are straight and or top edge bevels;

This model of XBJ-3 machine of steel plate edge milling is a perfect choice, applied as Welding Groove Processing Equipment.

B. Put into Use of XBJ-9 Single Head Sheet Metal Edge Milling Machine:

1. Strong Points of XBJ-9 Sheet Metal End Milling Machine:

Under the precondition of meeting customer demand, this model of Edge Milling Machine has the prominent advantages of:

1) Cost effective, saving machine investment budget and running cost;

2) The least area occupied and flexible relocation;

2. Make Welding Bevels with this Welding Groove Processing Equipment:

1) With single set of milling unit equipped with this equipment, the workpiece can only be made with edge milling operation of top chamfers, or straight edge:

Finished Straight Edge Beveled Steel Plate from Wuxi JACK machine for edge milling: (Fig.1)

2) Cutting Bottom Edges Welding Groove with single head Edge Milling Machine:

If it is necessary to have welding groove making on bottom edge:

a) The workpiece needs to be loaded off the machine of sheet metal edge milling, at the completion of top edge chamfer making;

b) Flipped 180° to the inverse side facing up, making its original bottom edge turned into top edge;

c) And loaded onto the machine of edge milling  again for the second time steel plate edge milling.

C. Operation of XBJ-3 Single Head Sheet Metal Edge Milling Machine:

The attached picture shows an operator manipulating on this set of compact size machine for end milling, in the step of manual feeding and adjusting the milling cutter;

1. Operating Panel of the Welding Groove Processing Equipment:

a) It is installed onto lateral side of the moving carriage of the milling unit, within one arm reach of operator. As shown in the attached 2^nd photo;

b) In this way, it is very easy and convenient for operator to manipulate on the entire edge milling process in this End Milling Equipment;

2. Precise Positioning and Securing of Workpiece into the End Milling Machine:

1) This is very critical on quality control of Welding Groove Processing Equipment;

2) For this purpose, we have fender unit installed on the worktable of the Advanced Function Edge Milling Machine, to locate workpiece in reliable and firm manner, under the protection of hard stop;

3) Please check the attached 3^rd photo and below:

Position the workpiece (Steel plate) onto machine worktable by m: (Fig.2)

3. Apply plate fender unit in Metal Plate Edge Milling Machine: (Fig.3)

Continued from the previous topic:

1) When not in use, the claws of the fender unit shrink, and are plugged into the holes beneath surface of the End Milling Machine working table, no any space to be occupied;

2) At the time before loading the workpiece onto the Edge Milling Machine, pull out claws of the fender unit out of its locating holes by hand, and push it upward to the perpendicular position, and fix this position by means of plugging locating pin;

3) The array of claws thus forms up hard stops in a straight line, which can manage accurate position of the workpiece before working of the Welding Groove Processing Equipment;

4) After fixing of the workpiece with hydraulic jacks, claws of this fender unit can be turned back to its original position: Of retracting into holes.

D. Technical Parameters of XBJ-3 Steel Plate Edge Milling Machine: