Horizontal Revolving Fixture Type Welding Positioner with Double Connection

1.     The Specialty of Double Table Top Fixture type Welding Positioner:

1)      As can be checked from attached photos, the double table top Fixture type Welding Turning Table gets product name from its appearance looking like a set of Welding Fixture;

2)      In fact, this Fixture type Weld Positioning Equipment can be viewed a Welding Fixture installed with motor reducer, for realizing its motor drive Welding Turning Table revolving;

3)      At some Construction Machinery facilities, such as Cab plant, or Operator Station facilities, such Fixture type Weld Positioner is used for manual welding

 The attached photos were taken at such workshop for Fixture type Welding Positioner: (Fig.1)

2.     Working Principle of Double Connection Fixture type Welding Turning Table:

In view of operating way, this Fixture type Welding Positioner is similar to the previous product of “Double Table Top Universal Welding Positioner”:

1)      One Degree of Freedom, that workpiece can revolve on the Welding Fixture, around the shaft joining the two ends;

2)      0°~360° Infinite Revolve of workpiece, in constant or adjustable varying speed of the Welding Turning Table;

3)      Driving and idler: In the Welding Positioner, one side of the Welding Turning Table is driving type, and the other end is follower type.

3.     The Characteristics of Double Table Top Welding Fixture type Welding Positioner:

On the other side, there are many differences in this double Table Top fixture type Welding Positioner:

1)      Lessening Down the Original Welding Turning Table in the Welding Positioner:

As can be seen from the attached photos, it weakens design of the two Welding Turning Table at both ends, into more approaching to two connections. This is completely different from conventional Double Table Top Lifting and Rotation Welding Positioner;

Fixture type Welding Turning Table: (Fig.2)

2)      Strengthen the Intermediary Bracket into New Welding Turning Table:

a)       It enhances design on the connecting bracket joining the two ends of connections, making it a real sense Welding Turning Table;

b)      Actually, the most important working section of this Welding Fixture type Weld Positioner is its middle part of the intermediary Welding Turning Table, which is the genuine worktable of this double table top Fixture type Welding Positioner, serving as the holding and turning unit of the workpiece;

Fixture type Welding Turning Table: (Fig.3)

c)       The specific design on this intermediary Welding Turning Table varies from case to case, which is similar to sole purpose Welding Fixture;

d)      Due to its orientation of horizontal direction, we can call this type of Weld Positioning Equipment as horizontal Fixture type Welding Positioner.

4.     Convenient Fitting of Workpiece onto Welding Turning Table in the Fixture type Welding Positioner:

1)      Three Advantages of Workpiece Fitting in Fixture type Welding Positioner:

a)       In such Fixture type Weld Positioner, with several pieces of quick pliers deployed on the Welding Turning Table, the workpiece can be positioned into place and secured firmly within seconds. This is one of its advantages of easy fit up in such Weld Positioning Equipment; 

Fixture type Welding Turning Table: (Fig.4)

b)      Besides, another merit with this kind of horizontal Fixture type Weld Positioner is the holding unit can have both sides clamped with workpiece. So, two pieces of workpiece can be welded at the same time on such Welding Turning Table;

c)       The 3^rd strong point with this double table top Fixture type Welding Positioner is its Welding Turning Table, which is actually work table, has lower level of height than of the Universal Round Table Welding Positioner, which is a good point ergonomics for operator to perform comfortable welding job;

Fixture type Welding Turning Table: (Fig.5)

2)      Design of Welding Turning Table in the Welding Fixture type Welding Positioner:

a)       The design on location of quick up pliers on the Welding Turning Table, allows for different structures of workpiece can be fixed onto this horizontal Fixture type Weld Positioner;

b)      So long as length of the workpiece is less than length of the Welding Turning Table (work table), the workpieces of various length can be welded on this horizontal Fixture type Welding Positioner, without the necessity of adjusting both ends of connections;

c)       In real application, the two ends connection of the Welding Turning Table are fixed and are available for modulation.

5.     Summary on the Double Table Top Welding Fixture type Welding Positioner:

1)      With all the above discussed advantages, these horizontal Welding Fixture style Welding Positioner have wide application at plants producing Vehicle, Construction Machinery, Engineering machinery, etc. It is a common purpose production machine tool;

2)      This sub group of Welding Positioner (Welding Fixture) should be classified as special made. The design on both sides of connections, and the intermediate holding Welding Turning Table, varies on specific customer needs. So, there is no specific technical parameters here.