Simple Type Single Axis Electric Variable Speed Welding Positioner

1. The Quick Definition on Simple type Single Axis Welding Positioner:

Same as the motor drive Weld Turning Table introduced in the previous product section, this section of single axis weld positioning equipment is also a reduced version of previously introduced single work table Weld Positioner.

2. The Specialty and Uniqueness of Simple type Single Axis Welding Positioner:

Difference of this Simple type Welding Positioner with horizontal Rotary Welding Table:

1) The revolving Single Axis Weld Turning Table of this simplified welding machine tool is usually in the vertical plane. Or, in other words, its rotation axis is in horizontal direction;

Vertical orientated and revolved work table: (Fig.1)

2) Comparatively, Rotary Welding Table and workpiece is basically horizontal, or, in other words, its rotation axis is in vertical direction;

Horizontal orientated and revolved work table: (Fig.2)

3) To put it simply, revolving axis of this Single Axis Simple type Welding Positioner is at 90° with that of the horizontal Weld Turning Table. Please check and compare the attached and above pictures;

4) Adjustable Revolve Speed of Single Axis Rotary Welding Table:

Its vertical revolving Weld Turning Table and workpiece is speed adjustable and adjusted with A.C. inverter. So, this is a kind of variable speed single work Axis welding equipment.

3. Performance Characteristic of Electric Simple type Single Axis Welding Positioner:

1) Why this Single Axis Welding Positioner to be made:

a) In certain application scenarios, welding seam of workpiece has simple and regular distribution. For these workpieces, one degree of freedom of 0°~360° revolving can meet the demand of welding technology for most majority seams;

b) In such cases, a Simple type Single Axis Welding Positioner can effectively lower down manufacturing cost of the machine tool in a great extent, and so is quotation of the welding positioning equipment itself, and fulfil successfully welding task at the same time, reaching the best bridging point of Weld Turning Table performance and production cost;

2) What kind of workpieces are applicable for Single Axis Welding Positioner:

a) What kind of workpieces are suitable for such variable speed Single Axis Weld Turning Table? --- Those working parts with round welding seam and in short length;

b) Or, to put it plainly, those workpiece of which the ratio of length to height against diameter is small;

c) In this way, after the workpiece is secured on the vertical Weld Turning Table, it will not have long extended length.

4. Structure of the Simple type Single Axis Welding Positioner:

1) Without tilting movement of the Rotary Welding Table, this electric single work axis welding positioning machine tool removes sector gear and its motor reducer. So, you can check from the photo that equipment body can be made into a box type, steadily and solidly standing on the ground; 

Wuxi JACK single control axis welding revolve work table: (Fig.3)

2) Also, drive and transmission system of Rotary Welding Table revolving can be put inside the cavity of the welding machine tool mechanical body;

3) Control elements can also be put inside the cavity of Single Axis Welding Positioner body;

4) Thus makes the complete set of welding machine tool has straight and concise appearance. See below picture; 

Assembly site of single motion axis Welding Positioner at Wuxi JACK workshop: (Fig.4)

5) There is a kind of Weld Turning Table with similar structure and working way, the difference is with 2 pieces of rotary welding work table. If you are interested, please check product section of “Double Table Top Weld Positioner”.

5. Operation of the Simple type Single Axis Welding Positioner:

1) Operating pendant is integrated onto lateral side of Weld Turning Table body, convenient for handling and operation: (Fig.5)

2)  Sometimes a foot pedal switch is used to relieve hands of operator, for doing other jobs during working of the Single Axis Welding Positioner. See below picture: (Fig.6)

3) Loading Tonnage of the Single Axis Welding Positioner:

Often used loading capacity is 2 Ton, 3 Ton, 5 Ton and 10 Ton.  

6.  Technical Parameters of Simple type Single Axis Welding Positioner: