Background: The attached first photo was taken at customer site. It is a set of Wuxi JACK produced ASM100 model Angle Bar Straightening Machine. Checking carefully, you may identify that, there is a small piece of Angle Steel on the output conveyor of the machine.
The other side of the Angle Straightening Machine is shown in the attached 2nd photo. This is also the complete arrangement of the machine. Checking from it, one set of the ASM series machine for high efficiently implementing on L Steel Straightening mainly composes of:
This constitutes mechanical main body of the machine. (For detailed introduction, please check product section of “ASM160 machine for Angle Steel Straighten”), including:
a) Gantry type machine frame (Please check the attached 3rd photo), which forms structure and cavity for accommodating top and bottom straightening rollers and its movement in between;
b) There are 4 or 5 pairs of top straightening rollers, which perform up and down stroke pressing to straighten the Angle Steel, during work of the machine for fulfilling Angle Bar straightening;
c) There are 4 or 5 pairs of bottom straightening rollers, which are fit fixed inside the lower section of the cavity, serving as the force bearing unit during straightening process in the machine for Angle Straightening:
The pair of straightening rollers (Up assembled, downward acting versus bottom assembled, stationary) for the machine: (Fig.1)
a) Length of Conveyor Roller Table: Standard length is 5.8m ~ 11m each for infeed and outfeed conveyor, which can be changed based on customer demand. Please check the attached 4th picture. Its rollers are made of high quality 45# steel, with strong intensity:
The mechanical frames and rolling rollers of conveyors roller table, ready for shipment: (Fig.2)
b) Diameter of the rollers in the conveyors differ among specific model of the automated Angle Iron Straightening Machine: It is determined by size of the largest Angle Steel to be straightened in the corresponding model. For example, for machine model of ASM160, its roller size of the conveyor is calculated based on the 160*160mm Angle Irons;
a) Motor Power for Different Models Machine: This is power source of the machine for realizing high efficiency Angle Steel Straighten. Based on specific model of the machine, its power varies from 5.5kW for ASM63 model machine, to 18.5kW for ASM200 model machine;
b) Installation Position: The main driving motor is installed at backside of the machine body (see the attached 3rd and 5th photo). It is driving force on high transmission efficiency and rapid straightening output of the machine of Angle Bar straightening;
a) This unit is the “Brain and hand” of ASM series machine for performing on automatic Angle Steel Straighten. Please check the attached 6th photo. Control board is fit on machine body at opposite side of the motor and reducer, making the Angle Straightening Machine a compact structure for easy commissioning, operation and maintenance;
b) All of the above units work together, as an integral system of the ASM models machine for the task of efficient Angle Iron straightening, making foundation on the solid and reliable Angle Steel straightening process;
a) You may want to comprehend straightening principle of the machine. Please check product section of “Universal Automatic High Speed ASM200 Machine of Angle Bar Straightening”;
b) You may want to comprehend how to operate the machine properly. For this, please check product section of “Fast Speed Automatic Lengthways ASM130 L Steel Straightening Machine”;
c) The commissioning process of Angles Steel please check the attached video.
Below are specifications of ASM series machine:
Model Technical Parameter | ASM63 ~ ASM 200 Angle Iron Straightening Machine |
Min. Cross Section size of Angle Iron (mm) | 20 ×20×3 ~ 60 ×60×5 |
Max. Cross Section size of Angle Iron (mm) | 63 ×63×8 ~ 200 ×200×20 |
Max. Length of Angle Iron (mm) | 10,000 |
Main Driving Motor Power | 5.5 kW ~ 18.5 kW |
Angle Iron Straightening Speed (mm/min.) | 6000 |
Straightening Rollers Interval (mm) | 393 ~ 697 |
Diameter of Top/Bottom Roller (mm) | 240/230 (Top / Bottom) for ASM63/100 270/260 (Top / Bottom) for ASM130/160/200 |
Input Conveyor Length (mm) | 5800 (Or designated by customer) |
Output Conveyor Length (mm) | 5800 (Or designated by customer) |