Fast Speed Automatic Lengthways ASM130 Angle Steel Straightening Machine

Background: This set of ASM130 model Angle Iron Straightening Machine was taken at Wuxi JACK ready to ship area. It had been commissioned and painted, waiting for delivery to customer.

1. Usage and Full Configuration of ASM130 Rolled Angle Straightening Machine:

1) Workpiece and Machine Purpose of the Rolled Angle Straightening Machine:

a) Workpieces: Angle Steels (The same name: Angle Iron/ L steel/ Rolled Angle/ L Steel) is a kind of widely used material in Manufacturing/ Construction/ Building field. For example, Shipbuilding/ Industrial Furnace/ Reaction Tower, etc. There are several grades of specification of these Angles Irons, ranging from as small as 20 x 20 x3mm to as big as 200x 200 x20mm;

b) Straightening Capability: Correspondingly, based on the largest size of the Rolled Angle that can be straightened, the ASM series L Steel Straightening Machine has series of standard models. Of which the ASM130 model machine for fulfilling Angle steel straightening, is the middle size of these series of equipment, and also an often selected model, due to the size range of the Angle Irons it can process. The largest Angle Steel available for being straightened in ASM130 model Angle Steel Straighten Machine is 130 x130 x 10 mm:

Trial run on ASM130 model with Angle steel straightening, at Wuxi JACK workshop: (Fig.1)

2) Complete Configuration in L Steel Straightening Machine:

a) Conveyor Roller Table: The attached first photo was taken on mechanical main body of the machine. Besides, there are input and output conveyors roller table of 5.8m length respectively, at the both ends of the main body, which is shown in the second photo;

b) Straightening Speed: This ASM130 Angle Iron Straightening Machine has fast speed on straightening (6000mm/min. Fixed speed), and good straightening effect. Usually, one time job can meet the demand on straightness of the straightened Rolled Angles, without the need of the 2nd time straightening through the machine, for implementing on rolled Angle straightening.

2. Operation of ASM Series Rolled Angle Straightening Machine:

Operation of this type of machine, for realizing fast speed L steel straightening, is carried out with Operating Pendant at Hand/ Handwheels on the top of machine body / Operating Panel on the control board. See the attached 3^rd to 4^th pictures for the three sections:

1) Operating Pendant at Hand of Angle Iron Straightening Machine:

a) Please check the attached 3^rd photo. Because of the long size of the machine, including its input and output conveyor roller table, sometimes it is convenient to have an operating pendant close at hand. Please check attached picture also for the operating pendant equipped in the machine for a Russian customer:

Operating pendant of Wuxi JACK ASM130 exported to Russia: (Fig.2)

 b) It is the main operating component in Wuxi JACK ASM series Angle Steel Straighten Machine. You can see from the attached 3^rd photo, that each of the 5 pieces of top straightening roller all has its control toggle switch;

2) Handwheels on the Top of Angle Steel Straighten Machine Body:

Please check the attached 4^th photo. In the small and medium models of the machine (ASM63/ ASM100/ ASM130), for making adjustment on moving down stroke of top straightening rollers in precision fashion, there is one array of handwheels installed on the top surface of the machine main body. One handwheel corresponds with one set of top roller right beneath it;

The 5 pieces of handwheels, being installed on top of the Wuxi JACK ASM63/ ASM100/ ASM130 model machine: (Fig.3)

3) Operating Panel and Electric Control Board of Angle Straightening Machine:

Please check the attached 5^th and 6^th photos. Strictly speaking, it is not an operating panel, but just several control buttons for managing the general condition of the L Steel Straightening Machine instead: 

a) The air breaker at lateral side of the control board; 

b) The emergency button at front door of control board; 

c) The leftward and or rightward movement of Angle Irons, etc.

 In All, not only straightening speed, but also operation is intuitive in operation of these ASM series fast speed Rolled Angle Straightening Machine. Please check attached video on straightening process in the machine:

Electric control cabinet of Wuxi JACK ASM models machine: (Fig.4)

4) Complement on Topics of Rolled Angle Straightening Machine:

a) For straightening principle of the equipment, please check product section of “Universal Automatic High Speed ASM200 machine for Angle steel straightening”;

b) For working process control of the equipment, please check product section of “High precision automated length direction machine for Angle steel straightening”;

c) For constitutes of the equipment, please check product section of “High efficiency automated length direction machine of Angle steel straightening”.

3. Technical Parameters of ASM130 L Steel Straightening Machine: