Box Frame Structure Electric ASM100 Steel Angle Straightening Machine

A. Mechanical Main Frame of Angle Steel Straightening Machine:

1) The product name of this section gives vivid description on appearance feature of the mechanical main frame of the ASM series machine for Angle Steel straightening job: 

2) As you can check from the attached first photo, it looks like a large piece of square box standing on the workshop ground, secured with arrays of stiffeners as footings.

B. Downward Stroke Adjustment for Upper Straightening Rollers in ASM series Angle Steel Straightening Equipment:

1. The Importance of this Step in the Angle Steel Straightening Machine:

1)  Definitely this is the critical step in operation of the ASM series Angle Bar Straightening Machine: Proper adjustment on these parameters can make sure smooth flow of Angle Steels during work of the ASM Rolled Angle Straightener: Not too tight (Small clearance between upper and lower straightening rollers), nor too loose (Too big clearance) engagement of the upper and lower straightening rollers;

2) And proper volume of plastic deformation contributed in workpiece, making best straightening quality from this ASM models Angle Straightening Machine;

2. So, the first question, how to Attain the Target in the Angle Steel Straightening Equipment?

1)  The attached second sketch is the recommended downward stroke, for each piece of the upper position assembled straightening roller, in ASM100 model machine of Angle Steel Straightening. Due to confidential consideration, we obliterate these data in the parameter table;

2) Observing it, you can see that we give empirical data on each of the upper straightening roller for each kind of workpiece specification applicable for this ASM100 model Angle Steel Straightening Equipment: From as small as 25x25x7mm, to the largest one of 100 x100x14mm;

3) We (Wuxi JACK) have accumulated these precious data with years of test and validation. Which, we will share with customer when making delivery of the corresponding model of the ASM model machine. It can be used as reference for customers of this Rolled Angle Straightener;

3. The second question, suppose you are reading these data, how to comprehend it for the Angle Straightening Machine?

Let us discuss this topic in conjunction with the second illustration and third photo:

1) Where is reference zero point as indicated by the ruler in the Angle Bar Straightening Machine?

a) Observing the second sketch for the ASM100 model machine of Angle Bar straightening, it is the penetrating line going all the way through the row of upper position assembled straightening rollers in the top and the row of lower straightening rollers in the bottom;

b) In other words, when the upper straightening roller touches the surface of Angle Steel, this horizontal level can be taken as zero datum line of the ASM model model machine, for its Angle Steel Straightening operation. All the downward adjustment modulations in ASM series Rolled Angle Straightener are made on that basis;

2) Then, the position of the pointer or needle of the ruler means in the Angle Steel Straightening Machine?

Checking the third photo: Yes, this means this specific piece of upper straightening roller had been modulated downward in the stroke of 8mm, in this set of ASM Angle Steel Straightening Equipment;

4. The third question, are the necessary downward stroke of all the upper straightening rollers same, in Angle Bar Straightening Machine, for straightening certain piece of Rolled Angle?

1)  The answer is no. As you can imagine, during straightening process of the ASM model machine for accomplishing Angle steel straightening task, in the sequence of workpiece flow, the workpiece grows more and more straight, with going through each of the upper straightening roller;

2) So, that is correct: The requisite downward stroke decreases from the first piece of upper straightening roller to the last one, in this series of ASM machine on Angle Steel straightening role;

5. The fourth question: Does sequence on management of downward parameters matters?

The answer is no. Before straightening process of the ASM equipment of Angle Steel straightening , operator can make adjustment on straightening volume of all the upper rollers in the sequence of his or her preference. It does not matter which roller adjusted first and which roller adjusted last;

6. Supplementary Notes on the Angle Steel Straightening Machine:

1)  The contents of this product section are all the topic of parameter setting, which not cover the aspect of Angle Straightening Machine hardware. If you want to check structure of the ASM machine, please check product section of “High Velocity Automatic Longitudinal ASM160 Angle Steel Straightening Machine”;

2)  If you want to check main units of the ASM machine, please check product section of “High Efficiency Automated Length Direction Angle Steel Straightening Equipment”;

3)  If you want to check working units (Straightening mechanism and driving system) of the ASM machine, please check product section of “ASM200 model machine with high power motor drive, for Rolled Angle Straightening”.

C. Technical Parameters of ASM100 Angle Steel Straightening Machine: