1. The 5 Axis Multifunction CNC Pipe Cutting Machine can cut pipes into required length, and make beveling within the same stroke of operation, thus attaining the perfect accuracy in high efficiency;
2. The cutting technology adopted in this Flame Plasma CNC Pipe Cutting Machine can be both oxy-fuel, and compressed air plasma cutting;
3. Like all the “/9” models of Multifunction CNC Pipe Intersect Cut Machine, this model of 5 Axis 1400/9 is created on the heel of 5 Axis 1400/12 CNC Pipe Intersection Cutting Machine. And the configuration of 5 Axis control is the best choice for investment on the aspect of precise cutting and beveling, for specification of Φ1400mm diameter CNC Pipe Cutting Machine.
1. At the early stage of CNC Pipe Cutting Machine, 5 Axis was the high end version for Φ1400mm diameter pipe;
2. At that time, the impetus on exploiting 5 Axis control for the purpose of chamfering and beveling is, this equipment of CNC Pipe Cutting Machine is for making prepare for next step of welding and or assembly, in corresponding Welding Roller Bed. So, the ability of beveling the critical performance index, for any set of CNC Pipe Intersection Cutting Machine;
3. For those pipes with thick wall, without groove of kerf (3 Axis CNC Pipe Cutting Machine can not attain this target), it will be difficult to have accurate assemble under the condition of oblique intersection of pipe;
4. The reason is, in CNC Pipe Intersect Cut Machine, programming is done on the basis of external diameter of pipe. So, the wall thickness multiply with cos of oblique angle of the pipe, the result will be bigger or smaller than the accurate result, which causes difficulty on later-on assembly;
5. For this 5 Axis Flame Plasma CNC Pipe Intersection Cutting Machine, the difficulty mainly lies in precision and stability of kerf cutting unit, which calls for sophisticated technology;
6. Recent years sees burgeoning on technique of CP series Multifunction Flame Plasma CNC Pipe Intersection Cutting Machine, and the 5 Axis CNC version is the mainstream which has advantages of best cost effectiveness, delivering stable and good quality performance from CNC Pipe Cutting Machine nowadays.
Below is specification of 5 Axis 1400/9 Flame and Plasma Multifunction CNC Pipe Intersect Cut Machine:
Model Technical Parameter | 5 Axis CNC-CP 1400/9 Multifunction Flame Plasma CNC Pipe Intersection Cutting Machine |
Accommodating Diameter Range of Pipe for Cutting and Beveling (mm) | 300 ~ 1400 |
Accommodating Max. Length of Pipe For Cutting and Beveling (mm) | 9000 |
Accommodating Thickness Range of Pipe (mm) | 6~100 mm for flame cutting 3 ~ 25mm for plasma cutting |
Accommodating Cutting Speed | 200∼800mm/min. for flame cutting Around 200~ 2000mm/min. for plasma cutting (Based on thickness of Pipe and Plasma Power) |
CNC Control Axis Effective | 5 Axis of X/Y/Z/A/B X Axis: For cutting torch positioning along pipe longitudinal direction; Y Axis: For managing pipe CW/CCW rotation; Z Axis: For controlling cutting torch elevation based on pipe diameter; A Axis: For tilting cutting torch along pipe radius; B Axis: For tilting cutting torch along pipe longitudinal direction |