Middle Size Cost Effective CNC Pipe Intersection Cutting Machine

A. The Usefulness and Usage of 5 Axis 2000/12 Cut and Beveling Thermal CNC Pipe Intersection Cutting Machine:

1.       This model of CNC Pipe Cutting Machine can be described as “Medium level” and “Middle Size”: Medium level control complication of 5 axis, which can meet most majority of cutting beveling, and middle size range of workpiece pipe, which covers the largest percentage of workpieces, in practical application of the Thermal CNC Pipe Cut Machine;

2.       For this reason, this model of 5-Axis 2000/12 Flame Plasma Cut and Beveling CNC Pipe Cutting Machine has very extensive application. Compared with counterpart in the same pipe specification: The 7 Axis 2000/12 Cut and Beveling CNC Pipe Cut Machine, this 5 Axis model is very cost effective: About 8% lower quotation than the 7 Axis 2000/12 CNC Pipe Intersection Cutting Machine;

3.       Same as the model of 7 Axis 2000mm model, this model of 5 Axis 2000mm specification CNC Pipe Cutting Machine is the completion for filling the workpiece size vacancy between 1400mm grade and 3000mm grade, in product line of CP series Cut and Beveling CNC Pipe Intersection Cutting Machine.

B. The Position Relationship among Cutting Torch, Workpiece, and Holding Unit, in 5 Axis 2000/12 Cut and Beveling Thermal CNC Pipe Cut Machine:

1. The Pipe Holding Unit in 2000/12 Grade CNC Pipe Cutting Machine: (Fig.1)

1)       As shown in the attached photos and the above photo, the middle size 2000/12 CNC Pipe Intersection Cutting Machine adopts with 2 arrays of friction rollers;

2)       Compared with chuck claw type in 600mm specification CNC Pipe Cutting Machine, such loading way in the Thermal CNC Pipe Cutting Machine is convenient and time saving:  (Fig.2)

2.       Cutting Torch Orientation in Cut and Beveling CNC Pipe Intersection Cutting Machine:  (Fig.3)

1)       Shown in the above photo, to have optimum cutting quality and efficiency delivered from the CNC Pipe Cutting Machine, cutting torch position is always kept 12 o’ clock position, facing to the straight downward direction;

2)       This is realized with Y axis pipe rotation, in the control system of 5 axis CNC Pipe Intersection Cutting Machine.

C. Operation in Cut and Beveling Thermal CNC Pipe Cutting Machine:

With the development of CP series CNC Pipe Cutting Machine, its training and operation becomes more and more standardized, easy and convenient:

1. Below is the interactive commanding interface for the programming of intersection between trunk and slant pipe, with CNC controller of the CNC Pipe Intersection Cutting Machine, simple and intuitional:

The Professional Workpiece Library Built in at the Control System of the Cut and Beveling CNC Pipe Intersection Cutting Machine: (Fig.3)

2. Shown in the above picture, the HMI (Human Machine Interface) of CNC operating system, in CNC station of the CNC Pipe Intersection Cutting Machine is concise and intuitive:

1) The grooves for the subsequent welding job can be cut with one time operation together with pipe length cutting. So, customers do not need to have following on machining. The welding grooves made in this CNC Pipe Intersection Cutting Machine are accurate and efficient;

2) The integral system of hardware CNC controller and programming software, as well as the working site instant programming with the working parts library... All of these advanced technique of Wuxi JACK, makes the original sophisticated and professional programming job available to anyone, relieving challenges for operators of the Cut and Beveling CNC Pipe Cutting Machine:

3) Just input expected dimension parameters of the pipes, can the precise and tailor made spatial profile cutting program created immediately, and hence the accurate workpieces can be cut in the CNC Pipe Cutting Machine;

4) In this way, it is not necessary to employ additional office PC and programming personnel specifically, for running of the CNC Pipe Cutting Machine.

D. Technical Parameters of 5 Axis 2000/12 Cut and Beveling Thermal CNC Pipe Cutting Machine:

Below is specification of 5 Axis 2000/12 Flame and Plasma Efficient CNC Pipe Cut Machine: