Giving the Best Protection on Sheet Metal Edge Milling Machine

Purpose of This Blog on Sheet Metal Plate Edge Milling Machine:

1)       Subject of Discussion: Here we plan to take several minutes, for discussing on several critical points of regular service on End Milling Machine, which directly determines performance level and service life of this Equipment for Beveling Sheet Metal;

2)       Aim of Exploration: We hope that, with discussion in this blog, customers and people involved can have the best degree of overall protection on Sheet Metal Plate Edge Milling Machine;

3)       Topics Covered on Protecting Sheet Metal Plate Edge Beveling Machine in This Blog:

•  Outline on Usage and Working Environment of Sheet Metal Plate End Milling Machine;

•  Lubrication Job in High Efficiency Automatic Equipment for Sheet Metal Edge Grooving;

•  Contamination Control in High Efficiency Automatic Equipment for Beveling Sheet Metal;

•  Rust Prevention in Daily Operation of Sheet Metal Plate Edge Beveling Machine;

•  Everyday Safe Operation in Sheet Metal Plate Edge Milling Machine;

•  Summary on Wuxi JACK Sheet Metal Plate End Milling Machine

A.       Outline on Usage and Working Environment of Sheet Metal Plate End Milling Machine:

1.       Task of End Milling Machine:

1)       Working Nature: Edge Milling Machine is a kind of Equipment for Beveling Sheet Metal on the welding front face of working parts;

2)       Outcome Delivered: This Equipment for Sheet Metal Edge Grooving addresses imperfections of irregular angles and rough slopes on lateral end face of workpieces:

3)       The smooth surface of finished workpiece groove, machined from Wuxi JACK End Milling Machine: (Fig.1)

2.       Working Environment of Edge Milling Machine:

1)       Tough Challenge: Such Equipment for Beveling Sheet Metal generally works in harsh surroundings, which often sees infiltration of dust, debris or even rain and wind onto the End Milling Machine, because fairly percentage of Edge Beveling Machine are installed outside:

2)       The outdoors working Wuxi JACK SXBJ-18 Sheet Metal Plate Edge Milling Machine: (Fig.2)

3)       This explains why should we pay special attention on proper protection on this important Equipment for Sheet Metal Edge Grooving.

B.       Lubrication Job in High Efficiency Automatic Equipment for Sheet Metal Edge Grooving:

1.       Working Groups in Edge Milling Machine Necessary for Being Lubricated:

1)       The spindle of milling head in Edge Milling Machine has high revolutionary speed: Up to 715 rpm;

2)       The facer blade elevation driving leadscrew and nut couple;

3)       The moving milling carriage, which leads horizontal movement of milling head along working table of the Edge Milling Machine;

4)       The double stages precise linear guide rails, for guiding facer blade operation in Wuxi JACK End Milling Machine: (Fig.3)

2.       Carrying Out Sufficient Lubrication in Equipment for Beveling Sheet Metal:

1)       At delivery of each set of Edge Beveling Machine, Wuxi JACK engineering team gives detailed introduction on how to implement proper lubrication, in its manual book;

2)       This is also accomplished with on site training at customer facility;

3)       Wuxi JACK keeps adopting advanced lubricating element in our Sheet Metal Plate Edge Milling Machine: (Fig.4)

C.       Contamination Control in High Efficiency Automatic Equipment for Beveling Sheet Metal:

1.       Role of Contamination Control on Performance of Edge Beveling Machine:

1)       Contamination Control is foundation on protecting and service of all manufacturing equipment and process technology, especially 1^st Operation and Assembly;

2)       For Sheet Metal Plate Edge Milling Machine, its core working unit: Facer blade in milling head, should be particularly protected with Contamination Control, this is precondition on acquiring its superior quality and long using life;

3)       The high quality facer blade equipped in Wuxi JACK Edge Milling Machine: Equipment for Sheet Metal Edge Grooving: (Fig.5)

2.       Contamination Control Mechanisms in Wuxi JACK Edge Milling Machine:

1)       The slant angle scrap disposal hopper beneath the milling head, in Sheet Metal Plate End Milling Machine: (Fig.6)

2)       The facer blade enclosure protecting plates, equipped in Wuxi JACK Sheet Metal Plate Edge Beveling Machine: (Fig.7)

3)       The HMI (Human machine interface) and its touch screen, protected in control cabinet of Wuxi JACK Edge Milling Machine: (Fig.8)

D.       Rust Prevention in Daily Operation of Sheet Metal Plate Edge Beveling Machine:

1.       Why Should We Introduce Anti-Rust Treatment for Sheet Metal Plate Edge Milling Machine?

1)       The steel plate Edge Beveling Machine is a very vital production device in the equipment production and processing sector;

2)       In recent times, with the development of mechanical processing and manufacturing, the line of Equipment for Beveling Sheet Metal has been increasing;

3)       Consequently, various models of Sheet Metal Plate Edge Milling Machine product, together with anti-corrosion abilities, have been raised in higher demands;

4)       The application of the Sheet Metal Plate End Milling Machine must be done, to avoid it from rusting, so as to properly make certain service life of this Equipment for Sheet Metal Edge Grooving;

2.       Negative Impact of Rusting on Working Ability of End Milling Machine:

1)       Several applicating fields of the Sheet Metal Plate Edge Milling Machine are especially prone to growing rust, this include Port Machinery, Offshore, Outdoors working Equipment for Beveling Sheet Metal, etc.;

2)       It is hard to take care of after Edge Beveling Machine growing corrosion. If this is trivial, not just the anti-corrosion capacity of the workpiece is poor, but also decor becomes bad;

3)       Customers also ask for high deterioration resistance for this Equipment for Sheet Metal Edge Grooving;

4)       At the same time, according to various working problems of the Edge Milling Machine, working parts made of cast iron/ cast steel possibly be blackened and phosphate at space temperature;

3.       Methods to Prevent Rust Phenomenon in Equipment for Beveling Sheet Metal:

1)       There is no shortcut to easily maintaining rust free condition on Edge Milling Machine once and for all, without careful consideration;

2)       Operators and service personnel of the End Milling Machine should draft and seriously implement regular TPM:

The main points covered are simplified here as:

a)       Maintain dryness level of End Milling Machine workshop;

b)       Isolate the Sheet Metal Plate Edge Beveling Machine from directly exposure in rain, blizzard, and other source of moisture, as well as pernicious chemical substance;

c)       Apply anti-rust oil to main working elements of the Edge Milling Machine;

d)       Periodically check condition of the Equipment for Sheet Metal Edge Grooving.

E.        Everyday Safe Operation on Sheet Metal Plate Edge Milling Machine:

1.       Safety First: Safety is always the primary note in Wuxi JACK, during developing all of our products, including Sheet Metal Plate End Milling Machine;

2.       Correspondingly, this Equipment for Beveling Sheet Metal has series of measures taken to ensure its security;

3.       When Running the Sheet Metal Plate End Milling Machine, Operator should Particularly Take Notice on Safety and Security:

1)       Check to see whether electrical insulation and ground is dependable;

2)       The prime condition of cables and control elements: Edge Milling Machine;

3)       Put on proper PPE: Safety glasses and hard shielded footwear, before operation of the Edge Milling Machine to prevent electric shock, and eyes harm;

4)       Examine whether machining parts: Facer blade is normal.

F.       Summary on Wuxi JACK Sheet Metal Plate End Milling Machine:

1.       Wuxi JACK has rich experience not only in working principle and structure of the Sheet Metal Plate Edge Milling Machine, but also its practical point, part of which is the main topics in this blog;

2.       This is benefitted from our long time devotion in the field of Equipment for Beveling Sheet Metal. Which, over the past decades, Wuxi JACK has close communication with customers both in China and abroad: We learn from each other, and acquire common progress in the process;

3.       For accessing detailed introduction on every product of Wuxi JACK Equipment for Sheet Metal Edge Grooving, please visit product family: Sheet Metal Plate Edge Milling Machine.